   |
|||
|
|||
      |
| Feed and Any Other
Materials Problem: The wheat middlings, finished feed and/or bonemeal bins have hang-ups and/or are bridged over. Pneumat Solution: BinWhip and BinDrill are made for these types of situations, because poking, prying and air lancing isn’t very effective and the hassles and issues of getting a confined space entry permit just add to the inefficiency of these other solutions. This is also extremely dangerous for employees because there is no telling when the product will give away. So we drill a hole through the bridged-over feed silo then set the BinWhip up and whip it out to create good flow and a safer work environment. Regardless of the product in any bin or silo, BinWhip and BinDrill can get it out safely. Problem: The wheat midds bins have slow flow due to moisture and forming big chunks. Pneumat Solution: Drill a hole into the chunk of midds at the opening at the bottom of the bin and place a rented Cardox tube into the hole. With an eyebolt on the activation head and attach it to a come-along for security and easy retrieval of the tube. TeamPneumat is an even easier way to get the job done with their years of experience. Problem: Fines in the various grain and feed products collected in the transition points between the hopper and sidewalls and it created a build-up. Pneumat Solution: Often the build up gets so overwhelming that capacity in the bin is reduced to a point where it seems as if you are constantly filling the bin because most of the product in there has stopped flowing. With the use of BinWhip, BinDrill and/or Cardox the product can be freed. Each tool fits different situations, but achieve one common goal; good bulk flow. TeamPneumat will take care of problem areas or provide maintenance on bins on a rotating basis for the most efficient work environment. |
 |
 |
 |
 |